Plexmotion

CSA-UA series

CSA-UA42D1-SH

Price End of Life (without tax)

CSA-UA42D1-SH
Package contents (Standard)
1,Driver
2,Motor
3,Motor-Driver cable (60cm)
4,Driver signal cable (60cm)
5,Driver power cable (60cm)
6,Operation manual
Data Download
PDFDXFIGSPDF
Outline2D data3D data Manual

* Please refer the attention before starting download service.
(2D data and 3 data are compressed by zip format)

□ Size[mm] Model name Price(without tax) Allowable
torque[N•m]
Gear
ratio
Allowable rotation
rate of
output shaft[r/min]
42 CSA-UA42D1-SH End of Life 0.8 1:100 0~18

Motor specifications

Model name CSA-UA42D1-SH
□Size[mm] 42
Type Standard
Type of Motor winding Unipolar
Shaft type Single
Step angle[°] 0.018
Rated voltage[V] 2.6
Rated current[A] 0.95
Winding resistance[Ω/phase] 2.7
Inductance[mH/phase] 2.3
Allowable torque[N•m] 0.8
Gear ratio 1:100
Allowable rotation rate of
output shaft[r/min]
0~18
Rotor inertia
[x10^-7kg・m^2]
33
Motor length[mm] 65
Motor mass[kg] 0.33
Ambient temperature[℃] -10 to +50 Deg.C. No freezing
Ambient humidity[%] 85% or less. No condensing
Storage temperature[℃] -20 to +70 Deg.C. No freezing
Storage humidity[%] 85% or less. No condensing
Atmosphere No corrosive gas, no dust surroundings. No water and oil splash.

Driver specifications

Power supply voltage[] DC24±10%
Current consumption[A] 3A Max
Driving method 2 phase unipolar chopper drive
Maximum input frequency[kHz] 50kHz
Output current[A/phase] 2.73A/phase Max.Peak current
Step division 1(1.8 Deg.),2(0.9 Deg.),4(0.45 Deg.),8(0.225 Deg.),16(0.1125 Deg.)
Bracket() shows step angle at 1.8 Deg./step motor drive.
Signal input 1)Pulse signal
2)Motor enable
3)Step division enable
4)Auto power down enable
(100ms after pulse signal input stopped)
*Input voltage DC 5 to 30V, Photocoupler input (Input resistor 330 ohms), Photocoupler current 10mA or less
Signal output Excitation timing signal : every 7.2 deg motor rotation
*Output voltage DC 5 to 30V, Photocoupler opening collector (Input resistor 100 ohms), Sink current 10mA or less
Indicator 1)Power condition LED indicator (Green)
2)Warning alarm LED indicator (Orange)
Function setting 1)Step division setting
2)Pulse input mode setting (1 pulse mode / 2 pulse mode)
3)Motor holding current setting (0 / 0.35 / 0.62 / 0.90 / 1.10 / 1.32 / 1.51 / 1.69 / 1.95 / 2.09A 10 steps setting)
Protectie function 1)Current fuse: Resettable fuse
2)Excessive current protection : 4.2A Typ
3)Excessive temperature protection : IC internal temperature 144 deg C
others 1) RoHS compliant
2) Locking connector
Ambient temperature[℃] 0 to +40 Deg.C. No freezing
Ambient humidity[%] 85% or less. No condensing
Storage temperature[℃] -10 to +50 Deg.C. No freezing
Storage humidity[%] 85% or less. No condensing
Atmosphere No corrosive gas, no dust surroundings.
No water and oil solash.
Dimension[mm] W65 × D51 × H33mm
Mass[kg] 0.08kg

Motor outline

CSA-UA42D1-SH Motor outline

Driver outline

CSA-UA42D1-SH Driver outline

Speed - Torque curve

[Running condition]
CSA-UA42D1-SH Speed - Torque curve graph

Maximum Starting Frequency

Top page